The higher the molding rate of the granulator, the higher the qualified rate, and the more profit you can invent. Therefore, the users in the use of wood chip granulator is the pursuit of high molding rate. How to ensure the molding rate of the sawdust particle machine?
1, as far as possible to make use of soft wood chips to make particles, many softer wood chips are simpler to press together, and can be useful to improve the molding rate.
2, limiting the best material moisture of sawdust granules is between 15%-20%. If the moisture is too high, the particles pressed loose will be loose in the process of packaging and transportation. If the moisture is too low, it will cause particles to be difficult to press, if the moisture is too low, the particle forming rate is low, and the powder material is too much.
Therefore, it is advocated that the moisture of the material is reduced by the method of drying or drying, and the moisture of the material is improved by the method of increasing the moisture. In the forming process of wood chips, the progress of particle forming rate can save a lot of material to reduce production cost and improve the profit of the users. At the same time, in the operation, we should cut down the mistakes in strict accordance with the operating rules.